All dwellings have a bathroom and bathtub. There are many types of bathtubs. One of them is a ceramic bath known for its strength. But still nothing is really perfect.
Problems that often arise from ceramic baths, whether poorly installed or long-term, can definitely be leaky. If it's already leaking, what can I do to fix it? Check out the following Kania article!
1. Detection of bus leaks
Some of the causes of bathtub leaks can be caused by external influences such as falling hard objects or ground movements such as earthquakes. However, if a leak occurs due to the long life of the tub and small cracks occur, the first way to find the leak is to fill the ceramic tub until it is full. Make sure that the cause of the leak is up to the limit of the wall or bottom of the bus.
The trick is to see the maximum threshold at which water will recede when it is completely filled. If there is no residue, you can see that the leak is at the bottom of the tub. But if it's still only 0.5 cm, the leak is on the wall of the tub.
Focus on the inside of the leaking area and feel the leaking area of the bathtub. Usually, the ceramic or the surface of the ceramic has loose grout (layers in between) that have collapsed slightly. From here you can find out where the leak is.
2. Make a hole in the bath to make it easier to repair
Why did you make a hole? This is done if the leak point in the bus is too small. The holes need to be a little wider to improve the filling process. This hole will help clean up any cracks in the bath leaks so that the patch looks good when you fill it.
use cutter Widen the leak point with a (cutter) or other sharp object. Make it carefully and enough.
3. Bathtub patching process
The ceramic cracks or shatters
This is the most common problem with bathtub leaks. Many people took immediate action by completely replacing the broken bathroom tiles. If you have only small cracks, patching is an easy and cheap solution.
All you have to do is prepare gray cement, fox-like glue, silicone glue for aquariums, small objects such as broom sticks, and waterproofing liquid. Take the gray cement and mix it with the glue, or take the aquarium silicone glue and stick it on the cracked area. Use a broom stick to glue the cracks in place.
Missing nut
The cause of grout peeling is that the holes in the grout become brittle and are left for long periods of time, eventually damaging the bottom of the ceramic. The good thing is to remove the tiles around the grout and clean the walls.
The material used is the same as the material used for cracked ceramic patches. After removing the ceramic, coat the surface of the wall with a layer, glue the removed tiles with cement, and patch the grout to the edges of the ceramic with a mixture of white cement and glue.
Broken ceramic
This collapsed ceramic can occur in types Bathtub anything. This usually happens when the cement and sand dough is not applied well. To fix this, remove the ceramic and add a new cement mixture to make the ceramic surface parallel to the other ceramics. Fill the grout with white cement and glue.
4. Bath drying process
After applying the waterproof solution to the bath, wait 3-4 days for the patch to dry. When the plaster is completely dry and hardened, coat the entire interior of the bathtub with a waterproof coating. Use fiberglass for the large bottom and corners of the bathtub or cavity. Wait another two days for it to dry, then repeat the coating.
5. Clean up the tub filling
What you shouldn't miss after patching a leaky tub is to get rid of it.prepare cutter Or a tool used to smooth cement and glue. There are usually some annoying protrusions after the process of repairing a leaky bathtub.
Cut out some of those protruding parts and flatten each section so that the patched tub does not look cluttered. A neat bathroom is the key to building a comfortable bathroom.
6. Run an experiment or test
When the bath patch dries, check for leaks and if the patching process is not yet complete. If the process of patching the leaking tub is not yet complete, such as when the plaster is not 100% dry, there should be a leak in the patching corner in a water-permeable manner. It is advisable to use non-slip bathroom tiles when designing bathrooms, as stagnant water penetration is extremely dangerous.
It is advisable to make a drain hole in the bottom to make draining the bathtub much easier. To prevent leaks, do not use a stiff brush when cleaning the bathroom.
These are ways to patch a leaking tub. good luck!
TFind inspirational articles and tips Home and life Other Decorma!!Not only articles, but also decorma Online furniture Indonesia, you know. Decorma sells dining chairs, TV tables, sofas and cupboards.
There is also a variety of super-finished kitchen utensils for those who like cooking. Decorma is mold, spatula, frying pan, electric teapot, Blender.. Find all your needs at Decorma!
Source : https://www.dekoruma.com/artikel/63387/menambal-bak-mandi-bocor
Read More..
99funtastic.blogspot.cominfohotelbymorgan.blogspot.com
health-and-medicine9020.blogspot.com